BC-10 | 6.5 Creedmoor Right Side Charging Forged Rifle | 20" Black Nitride Heavy Barrel | Rifle Length Gas System | 1:8 Twist | 15" MLOK Split Rail | No Magazine

Out of stock
SKU
CR9115N-SCH65CRHB2018MFL-15MSR

Limit 5 Per Customer

We recommend Sierra Ammunition

$560.21

This BCA AR-10 complete 6.5 Creedmoor rifle has a 20" black nitride heavy barrel, and features a 1:8 twist rate, with a rifle length gas system. It includes a 15" MLOK Rail, an M4 flat-top billet upper receiver, a BCA AR10 bolt carrier group, a flash hider, and a right-side charging (Gen 2) handle (patent pending). This rifle comes on the BCA AR10 forged Lower engraved then anodized.

Shop more 6.5 Creedmoor Rifles!

Magazine not included. Check out Magazines here!

 It is the responsibility of the consumer to ensure all state, local, federal, and ITAR regulations are followed.

* Note – We strive to provide the most accurate photographs of our product. Variations may occur in the skeletonized section of the handguard/flash hider you receive.

Attention SignAttention Sign

WARNING: This product can expose you to chemicals, such as lead and other petroleum products, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to the California P65 Warning site.

More Information
SKU CR9115N-SCH65CRHB2018MFL-15MSR
Weight (lbs) 10.000000
Magazine Capacity N/A
Barrel Length 20
Profile Heavy Barrel
Twist 1:8
Barrel Finish Black Nitride
Material 4150 Chrome Moly Vanadium
Thread Pitch 5/8 x 24
Caliber 6.5 Creedmoor
Feed Ramp AR-10
Flutes Straight Flutes
Gas System Rifle Length
Gas Block System 0.936
Charging Style Right Side Charging
Classification Rifles
Platform AR-10
Bolt Material E9310
Receiver Material Forged
Customer Reviews
Customer Questions
What magazine/ammo does BCA recommend for each caliber?
Caliber Magazine Ammo Grain Weight Ammo Brands   BCA Status AR15 - 223/5.56 MagPul PMAG, MFT 55, 69, 75   Sierra   AR15 - ...
What platform pattern are your AR10 Uppers?
Our uppers are made based on the DPMS Gen1 Low Profile model. With the AR10, there are many different designs and models out there, and each company tends to create and design its own unique platform.  For that reason, we cannot guarantee the fitment...
What is the trigger weight on your standard triggers?
We use standard MILSPEC triggers in our lowers and that is a standard trigger pull weight of 7-8 pounds.
Please, mind that only logged in users can submit questions

Ratings & Reviews

Be the first to review this product

Copyright © 2024 Bear Creek Arsenal, LLC. All Rights Reserved.