BC-10 | .308 Forged Rifle | 20" Black Nitride 416R SS Straight Fluted Heavy Barrel | 1:10 Twist | Rifle Length Gas System | 15" MLOK Split Rail | No Magazine

In stock
Only 1 left
SKU
CR9194N-308RMW20110SSMFFL-15MSR
$569.67

This BCA AR-10 complete .308 rifle length rifle has a 20" Black Nitrided 416R stainless straight fluted Heavy barrel, and features a 1:10 twist rate, with a rifle length gas system. It includes the new 15" MLOK split rail, an M4 flat-top forged upper receiver, a BCA AR10 bolt carrier group, a flash hider, and a rear charging handle. This rifle comes on the BCA AR10 forged lower engraved then anodized. 

Shop more .308 Rifles!

 

Attention SignAttention Sign

WARNING: This product can expose you to chemicals, such as lead and other petroleum products, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to the California P65 Warning site.

* Note – We strive to provide the most accurate photographs of our product. Variations may occur in the skeletonized section of the handguard/flash hider you receive.

More Information
SKU CR9194N-308RMW20110SSMFFL-15MSR
Weight (lbs) 10.000000
Magazine Capacity N/A
Length 20
Profile Heavy Barrel
Twist 1:10
Finish Black Nitride
Material 416R Stainless Steel
Thread Pitch 5/8 x 24
Caliber .308
Feed Ramp AR-10 Feedramp
Flutes Straight Flutes
Gas System Rifle Length
Gas Block System 0.750
Charging Style Rear Charging
Classification Rifles
Platform AR-10
Bolt Material E9310
Receiver Material Forged
Customer Reviews
Customer Questions
What magazine/ammo does BCA recommend for each caliber?
Caliber Magazine Ammo Grain Weight Ammo Brands   BCA Status AR15 - 223/5.56 MagPul PMAG, MFT 55, 69, 75   Sierra   AR15 - ...
What platform pattern are your AR10 Uppers?
Our uppers are made based on the DPMS Gen1 Low Profile model. With the AR10, there are many different designs and models out there, and each company tends to create and design its own unique platform.  For that reason, we cannot guarantee the fitment...
What is the trigger weight on your standard triggers?
We use standard MILSPEC triggers in our lowers and that is a standard trigger pull weight of 7-8 pounds.
Please, mind that only logged in users can submit questions

Ratings & Reviews

Be the first to review this product

We found other products you might like!
Copyright © 2024 Bear Creek Arsenal, LLC. All Rights Reserved.