Slide for Glock 17 | Gen-3

In stock

This BCA slide for Glock 17 has a Black Nitride finish. This slide is perfect for your 80% build or if you want to replace your current G22/G31 slide with a 9mm replacement slide.

Made in the USA and backed by our Bear Den Guarantee!


Please note: This slide does not include a barrel, sight, or parts kit.


Your BCA Slide for Glock!

  1. The slide has two lubrication points, the rails and the hood of the slide. Just apply a drop on each rail, with the muzzle pointed downward and let gravity allow the drops to run down to the front of the slide.
  2. Glocks were designed to not require much lubrication. ... No lubrication is required on the mag well, firing pin channel, breech face, barrel chamber, and none in the mag itself. 
  3. DOES NOT COME WITH factory copper colored grease, OR PRE LUBRICATED.
Attention SignAttention Sign

WARNING: This product can expose you to chemicals, such as lead and other petroleum products, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to the California P65 Warning site.

More Information
SKU S-9MM-17
Weight (lbs) 0.500000
Magazine Capacity N/A
Feed Ramp NON-Ramped
Flutes Non-fluted
Gas System Blow-Back
Classification Handgun Slides
Platform Glock Factory Replacement
Customer Reviews
Customer Questions
What Gen GLOCK do you replacement barrels for GLOCK work with?
Our BCA 19 and 26 barrels for GLOCK work with gen 1 through 5 GLOCK pistols. Our BCA 17, 22, and 23 barrels for GLOCK work with gen 1 through gen 4 pistols (They DO NOT work with gen 5)
Please, mind that only logged in users can submit questions

Ratings & Reviews

Copyright © 2024 Bear Creek Arsenal, LLC. All Rights Reserved.